Everytime this subject comes up,
someone mentions the water pipe
method. Around here, that works
wonderfully for a few feet until
you hit the "cemented hard pan".
Which is waterproof.
Then you get out the fence post
driver. 1/16 of an inch per blow
if you're lucky. I've already
worn out one fence post driver
(eventually poked a hole in the top).
Rick Karlquist N6RK
richard@karlquist.com
www.n6rk.com
www.karlquist.com
> -----Original Message-----
> From: towertalk-admin@contesting.com
> [mailto:towertalk-admin@contesting.com]On Behalf Of SavageBR@aol.com
> Sent: Tuesday, November 26, 2002 4:20 PM
> To: AA6DX@pacbell.net; towertalk@contesting.com
> Subject: Re: [Towertalk] Power ground rod driver
>
>
> It is sooo easy to water wash copper tubing into the ground
> for ground rods.
> Just partially close the bottom end of a 3/4 inch pipe to
> form a jet. Then
> attach a garden hose to the top end with a cable clamp,
> turn on the water and
> jet the pipe into the ground. I have put down many ten foot
> pipes this way
> without a single blow.
>
> If you insist on using solid ground rods, jet the copper
> pipe down without
> closing the bottom end, remove the hose, drop the solid rod
> down inside the
> pipe, replace the hose, turn on the water and remove the
> pipe leaving the
> ground rod in the hole.
>
> This works great in most soils, not so good in hard clay.
>
> Bruce, AA4Z
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|