Look up Concrete Contractors in your local yellow pages and call a few.
Bill Marx W2CQ
----- Original Message -----
From: "Jim Lux" <jimlux@earthlink.net>
To: <towertalk@contesting.com>
Sent: Sunday, September 07, 2003 12:17 PM
Subject: Re: Fw: [TowerTalk] Re: Tower base hole?
> Just checked on the web for local places that actually have prices for
> drilling (big) holes... looks like 150-200/hr is the going price for the
> auger rigs (and that includes the operator).. roughly twice what the same
> company charges for a backhoe w/operator. So the question is whether you can
> drill the required hole twice as fast as you can dig it, and whether a
> 3,4,or 5 foot diameter round hole is a better solution for your problem than
> a 4,5,or 6 foot square hole is.
>
> They have all manner of clever drill rigs available, too, that can get into
> difficult locations (around here, there are people who need to have holes
> drilled for support piers on steep hillsides, as retrofits for
> "mansionization" (tear down the 500 sq ft beach shack on a tiny lot and
> erect the 4200 sq ft 3 story house), and so forth. Clearly, there is a lot
> of art in this big hole drilling business...
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free,
1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|