Re: [TowerTalk] electric fence qrn

["Jim White, K4OJ" <k4oj@tampabay.rr.com>]

On this note...

Is there a solvent available which when poured onto copper that has 
oxidation will give it that shiny copper color?  I am looking for an 
easy way out versus burnishing it... if a solvent exists please share 
that info... pouring some of it on to allow tinning, etc. would be a 
wonderful way to avoid nicking copper which is always fateful!

73,

Jim, K4OJ


Pete Smith wrote:

> At 10:22 AM 12/9/03 -0500, Tony King - W4ZT wrote:
>
> > You can help your neighbor with a good ground rod and clamp plus 
> > remaking all those one or two twist  splices in the high voltage lead.
>
>
>
> Split bolts are a wonderful solution to these splices, and a lot easier 
> than taking them apart and redoing them -- they apply a tremendous 
> amount of pressure to the joint, which seems to break through any oxide 
> that has been formed.
>
>
> 73, Pete N4ZR
> Happy Holidays
> Check out the World HF Contest Station Database at 
> www.pvrc.org/wcsd/wcsdsearch.htm
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk