GA To All.............................
Am in the process of installing a 100' self supporting steel twr but am
going to put some guys on it just for my own piece of mind as there are some
pwr
lines abt 60' away.
I've been able to corral 500' of Polygon cable which will handle the guys @
90' but not enough for the set @ 40'. So guess I'll hv to go with steel cable
on the bottom.
Antennas will be a 40m rotable dipole and a 4L SteppIR.
My question is to whether the bottom set of steel guys need to be broken up
with insulators as they will be 65' below the SteppIR. TIA for your input.
Froggy K8FU
Forget Secretaries.................Take a Frog to Lunch.........
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|