They make abrasive blades for both power hand saws (generally called Skil)
and for chop saws. Both work very well on rebar.
Yes, rebar gets red hot when cut with an abrasive blade as well.
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
>I use my skil saw for sheet metal cutting and it can be used for re-bar.
> All I do is put the plywood blade on backwards and it becomes a circular
> file! You can not go the other way again, but you have a handy metal
> cutting saw after that. It really works well on sheet metal. Be
> careful because that rebar gets red hot!
>
> Regards,
> Monty/WB5GLB since 1969
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|