Towertalk
[Top] [All Lists]

Re: [TowerTalk] Obstruction Lighting

To: "Doug Rehman" <rehman@surveil.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Obstruction Lighting
From: <paul@w8aef.com>
Reply-to: paul@w8aef.com
Date: Tue, 5 Jul 2005 17:22:14 -0000
List-post: <mailto:towertalk@contesting.com>
I am under the impression that if you run 110 vac to and up the tower the 
work has to be done by a licensed electrician.

Of course if you installation does not have to be inspected.......

de Paul, W8AEF

----- Original Message ----- 
From: "Doug Rehman" <rehman@surveil.com>
To: <towertalk@contesting.com>
Sent: Tuesday, July 05, 2005 4:06 PM
Subject: [TowerTalk] Obstruction Lighting


> Due to my proximity to a small airport, the FAA is requiring obstruction
> lighting (L-810 light or lights) on my tower; painting is not required
> though. The tower will be a Tri-Ex LM-354HDSP 54' crank-up with 15' of 
> mast
> out the top.
>
> My first decision is where to mount the light(s). I was planning on a
> VHF/UHF vertical on the top of the mast. If I do this, then I'm going to
> need two lights since the light couldn't sit on the top of the mast. To 
> cut
> the lighting cost in half, I will probably make a sidearm for the VHF/UHF
> vertical to mount on pointed downward, thus allowing the light to sit on 
> the
> top of the mast.
>
> The next decision isn't quite as easy to make. I can use a standard 110 
> VAC
> light that costs about $120 or a 12 VDC light that costs $223 (Dialight
> model 860-1R03-001 from www.unimar.com). Either option only requires a
> couple of amps.
>
> I will have mast mounted preamps for 6m, 2m, and 70cm mounted at the top 
> of
> the tower, so I need 12 VDC there anyway. I could run 110 VAC to a NEMA 
> box
> with a 12 VDC power supply in it to feed the preamps and use the 110 VAC 
> to
> feed a standard L-810 light. A heavy outdoor extension cord, or stranded
> THHN, encased in flexible conduit would be used to run the 110 VAC to the
> top. The tower will already have 110 VAC at the base to run the winch.
> Alternatively, I could use the more expensive 12 VDC L-810 light and just
> run 12 VDC to the tower top for everything; running the preamps and light
> from a trickle charged battery would provide for emergency power.
>
> I'm leaning strongly towards the last choice (all 12 VDC on the tower), 
> but
> looking for input from the collective wisdom and experience of the group
> before committing.
>
> Thanks,
> Doug
> K4DDR
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>