Towertalk
[Top] [All Lists]

Re: [TowerTalk] Wire Size for 800 meter longwire

To: K4SAV <RadioIR@charter.net>, towertalk@contesting.com
Subject: Re: [TowerTalk] Wire Size for 800 meter longwire
From: Jim Lux <jimlux@earthlink.net>
Date: Thu, 13 Oct 2005 10:31:04 -0700
List-post: <mailto:towertalk@contesting.com>
At 08:54 AM 10/13/2005, K4SAV wrote:
>The gain decrease is because of wire surface area.  Conductivity of
>aluminum is actually less than zinc, but the surface area of a #17 wire
>is much smaller than the surface area of a 1/2 inch diameter cable.
>
>The pattern formed by a long wire is very complex.  There are large
>numbers of lobes and nulls, both in the azimuth and elevation
>directions.  Most of these are very narrow.  Because of this any small
>phase change in the current, causes large changes in the pattern.

To that end, you might be best served by "averaging" the pattern over some 
reasonable intervals (say, 5x5 degree squares or something).  They do 
something similar when trying to describe in a few numbers the sidelobe 
performance of high gain antennas.. you look at things like peak sidelobe 
or integrated sidelobe or rms sidelobe, depending on what's most evil for 
your application.

Jim, W6RMK 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>