Towertalk
[Top] [All Lists]

Re: [TowerTalk] Soldering RG213 to PL259

To: 'Garry' <g.drummond@verizon.net>,"'towertalk@contesting.com'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Soldering RG213 to PL259
From: Steve Katz <stevek@jmr.com>
Date: Mon, 5 Feb 2007 07:20:47 -0800
List-post: <mailto:towertalk@contesting.com>
Garry, these are fine.  The 83-1SP has a silver plated body and pin, and
astroplated shell (which doesn't matter, since you don't solder to the
shell).

73

Steve WB2WIK/6


Hi Steve,

I was searching the web tonight for the Amphenol 83-1SP PL259's and found a
model on Ebay advertised as "Amphenol Silver-plated Top quality, Diallyl
Phtalate (MIL-M-14F) insulated (temperature and insulation characteristics
similar to teflon) Silver Plated Amphenols with Nickel Astro-plated shells,
Silver-plated center pin and shield."

Is this the model to stay away from? Where they say silver plated pin and
shield, it sounded like the only part that was Astro-plated was the shell
that screws onto the SO-239.

I found this at:
http://cgi.ebay.com/AMPHENOL-PL259-CONNECTOR_W0QQitemZ5869276102QQihZ008QQca
tegoryZ7285QQrdZ1QQssPageNameZWD1VQQcmdZViewItem


Thanks,
Garry


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>