Or already felt....
Jos
-----Message d'origine-----
De : towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] De la part de Ian White GM3SEK
Envoyé : lundi 5 février 2007 7:29
À : towertalk@contesting.com
Objet : Re: [TowerTalk] Soldering RG213 to PL259
Bill Turner wrote:
>ORIGINAL MESSAGE:
>
>On Fri, 2 Feb 2007 08:26:32 -0800 , Steve Katz <stevek@jmr.com> wrote:
>
>
>>I'd stay away from the Amphenol "RFX" PL-259s, which can be found with
>>a Teflon dielectric
>
>------------ REPLY FOLLOWS ------------
>
>I agree. Teflon has a nasty characteristic called "cold flow" which
>means it will deform over a period of time due to simple mechanical
>pressure. While I have not personally heard of this causing a problem
>in coax connectors, I don't believe the other benefits of Teflon
>outweigh the risk. Ordinary phenolic has been used for decades with no
>problem at amateur power levels.
>
>This is not one of those "sky is falling" kind of warnings. If you
>choose Teflon it will probably work ok. Just be aware.
>
C'mon, Bill - every other respectable RF connector series uses Teflon!
The sky definitely isn't falling.
--
73 from Ian GM3SEK 'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.co.uk/g3sek
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|