Towertalk
[Top] [All Lists]

[TowerTalk] New QTH new Tower

To: towerTalk <towertalk@contesting.com>
Subject: [TowerTalk] New QTH new Tower
From: W4LDE-Ron <w4lde@cfl.rr.com>
Date: Sun, 29 Apr 2007 15:28:11 -0400
List-post: <mailto:towertalk@contesting.com>
As a new member to the group I am looking for some advice, looks like a 
move is in the workings and I have received approval from the 
Architectural board at the new QTH to place a crank up tower on the back 
of my new property, nested at about 22ft and rising to about 55ft when 
in use. I will need, due to age, a till over for work on a beam.

I will be installing either a SteppIR 3-el (42# and 6.1sq ft wind load) 
or a Sommer XP-506 (71# and 11sq ft wind load) on the top. I have looked 
at the MA-550 and TX-455 line of towers but I would appreciate any 
suggestions or recommendations you might provide.

May try to support a center feed zepp for 80-40-30 from the tower but 
the 1.5 acres has lots of trees, the builder will be clearing an area 
for the tower in the back section of trees, that’s an additional 
question on how much should I clear, I am lucky that I got the approval 
and thus I want to keep things out of sight as much as I can. Ideas please

Ron W4LDE
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>