There's one just for verticals at hamware.de - I think its the 615 model
and its high power.
73
Greg
AB7R
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of jimlux
Sent: Monday, November 24, 2008 6:27 AM
To: Richards
Cc: towertalk@contesting.com; Samir Popaja
Subject: Re: [TowerTalk] Was "43ft Vertical Feeding
Richards wrote:
> I think you meant to post the link to the 1500 w tuner, not the
> 200 w tuner.... and the big boy costs a mere $2100 with shipping
> extra.
>
>
> Looks like a good item, ... except the web page says it is for loops,
> and not for verticals. It says:
> Matches balanced Antennas (Dipoles, Loops, Inv. Vees, etc.)
> No RF Ground (Counterpoise, Radials, etc.)
>
>
> Maybe it would work, but it is rather expensive!
It can probably tune a vertical as well as anything else.
And, as previously noted, it too is in the couple of kilobuck class
(plus, that control cable is going to be pricey.. )
But, this kind of thing is what's needed.
(and, it could make a heck of a component for a steerable phased array..
you'd need one of these for each element plus some more to build the
phasing networks... if anyone's interested in spending a few tens of $K
on such a system, let me know..)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|