I use a balun for this. PL-259/SO-239 connection for the coax, loop terminals
for the balanced line. Strong, weatherproof, easy....
WB2WIK/6
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of W1JCW
Sent: Wednesday, October 21, 2009 1:32 PM
To: TowerTalk@contesting.com
Subject: [TowerTalk] Coax soldering
Hi guys -
What is your preferred way to solder an open wire feeder on say RG8 or RG213 ?
I know some cut the brand down the middle, solder it at the base and work their
way to the tip.
Some twist it then solder or flatting it.
I am looking to try something new.
Suggestions ?
73-
W1JCW
John
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|