Thanks Grant,
I'll soon be lubing my TX472 cables with Mac's Chain & Cable Lube (NAPA #1370).
As near as I can tell by comparing MSDSs, it's the same as Prelube 6.
vy 73,
Bryan WA7PRC
> Date: Wed, 12 Jun 2013 08:12:40 -0700
> From: Grant Saviers
>
> I've started lubricating the cables on my HDX589 with
> PreLube 6. For the
> main spool cable, I applied the lube when lowering the tower
> by spraying
> into a slotted plastic funnel on the cable. That
> technique worked very
> well. But now looking at the higher section
> cables between the
> sections, I'm wondering if there is a neat technique for
> application of
> the lube to them? Get to the top with the
> tower down, spray, and hope
> the lube runs all the way down the cable??
>
> (not a revisit of lube/not lube cables debate
> please). btw Prelube 6
> smells a lot like LPS2 or LPS3 so I might guess some of the
> ingredients
> are the same.
>
> Grant KZ1W
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|