Towertalk
[Top] [All Lists]

Re: [TowerTalk] How to apply lube to HDX589

To: Steve Dyer <w1srd@yahoo.com>
Subject: Re: [TowerTalk] How to apply lube to HDX589
From: Andre VanWyk <kr5dx@yahoo.com>
Date: Thu, 13 Jun 2013 13:38:58 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Well I never heard of a crank up tower that failed because the cables were not 
lubricated PROVIDING manufacturer guidelines are followed and cables are 
changed when required.

I think we as hams tend to both try to reinvent the wheel too many times. If it 
ain't broken, don't fix it!

NJ0F 

Sent from my iPhone

On Jun 13, 2013, at 11:41 AM, Steve Dyer <w1srd@yahoo.com> wrote:

> K7LXC breaks the prime directive for lubricating crank-up cables. He sells 
> Prelube 6 on his site and recommends using it. And yes, any professional user 
> of wire rope always lubricates their cables on a regular 
> maintenance/inspection schedule.
> It baffles me why anyone would not lube the cable with the *proper* lubricant 
> since the cable is THE critical link in a crank-up.
> It's a testament to how well the cable holds up that more failures haven't 
> occurred. That and it's way over-sized to the load.
> 73,
> Steve
> W1SRD
> 
> 
> 
> 
> ________________________________
> From: "john@kk9a.com" <john@kk9a.com>
> To: towertalk@contesting.com 
> Sent: Thursday, June 13, 2013 7:12 AM
> Subject: Re: [TowerTalk] How to apply lube to HDX589
> 
> 
> Lubricating the cable does go against the K7LXC prime directive. US towers
> recommends replacing the cable every three years.
> 
> Most wire rope is lubricated during manufacturing. Lubrication does two
> things:
> 
> Reduces friction as the individual wires move over each other.
> 
> Provides corrosion protection and lubrication in the core and inside wires
> and on the exterior surfaces.
> 
> If I owned a crank-up tower I would keep the cables lubricated and only
> change them if there was noticeable corrosion or broken strands .
> 
> John KK9A
> 
> 
> 
> To:     Bryan Swadener <bswadener@yahoo.com>
> Subject:     Re: [TowerTalk] How to apply lube to HDX589
> From:     Andre VanWyk <kr5dx@yahoo.com>
> Date:     Wed, 12 Jun 2013 22:45:37 -0400
> 
> 
> I am missing something here as US Tower advises against lubricating cables.
> 
> What are you gaining by lubricating cable? I my opinion if a un-lubricated
> galvanized cable shows signs of rust, it is time to replace it.
> 
> 73's
> NJ0F
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>