Towertalk
[Top] [All Lists]

Re: [TowerTalk] How to apply lube to HDX589

To: towertalk@contesting.com
Subject: Re: [TowerTalk] How to apply lube to HDX589
From: Jim Lux <jimlux@earthlink.net>
Date: Thu, 13 Jun 2013 09:20:14 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 6/13/13 8:41 AM, Steve Dyer wrote:
K7LXC breaks the prime directive for lubricating crank-up cables. He sells 
Prelube 6 on his site and recommends using it. And yes, any professional user 
of wire rope always lubricates their cables on a regular maintenance/inspection 
schedule.
It baffles me why anyone would not lube the cable with the *proper* lubricant 
since the cable is THE critical link in a crank-up.
It's a testament to how well the cable holds up that more failures haven't 
occurred. That and it's way over-sized to the load.


Well, if you were planning to follow the manufacturer's replacement schedule, and the initial lube lasts three years, why spend the time, money, and effort doing annual lube jobs?

I think what you're really getting at is:
Why would anyone not lube it at least occasionally during the 20-30 years that the ham owns it. I suspect that's a more realistic representation of operating life and maintenance.



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>