Magnus, I had the same problem here on my VHF antenna rotated by the
GX-450 and found loose contacts at the crimp portion where the cable is
terminated in at the control box plug was what caused it. Sometimes the
the inner blade on one of the contacts needs to be spread apart a bit
with a small jewelers screw driver. That is all It took here. No more
problems.
Herb, KV4FZ
On 12/14/2013 6:24 PM, Magnus Aronsson wrote:
Hi
My rotor controller has given up turning clockwise but works fine
anti-clockwise.
I had the same problem about a year ago and changed the "right-button"
to a new one.
Now it happened again.
Anyone had the same experiance and what could be the root cause?
73 de Magnus SM6WET
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|