I want to be able to put both antennas one the same tower on 2 different
radios. Each of the 4 towers is going to have a mono band stack of either 2 or
3 six element yagis plus 5 antennas for 80 and 160 so I kind of wanted a feed
from each antenna
Sent from my iPhone
> On Feb 13, 2017, at 11:02 AM, Ed Sawyer <sawyered@earthlink.net> wrote:
>
> John. Most of us would run 2 radios worth of hard line to a central spot
> and then have a 2 x 6 - 2 x 10 antenna switch that feed all the antennas in
> the field. This cuts the feed line expense substantially. Are you sure you
> need 5,000 feet? Sounds to me more like 2000 - 2500ft in the conventional
> switched configuration.
>
>
>
> My 2 x 8 switch happens to be at Tower 1 as the systems evolved over time
> (300 ft from the shack). Its another 150ft to Tower 2. 300 ft to the 160M
> array. Beverages and receive antennas are another story.
>
>
>
> 73
>
>
>
> Ed N1UR
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|