Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn U-bolts

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Rohn U-bolts
From: Patrick Greenlee <patrick_g@windstream.net>
Date: Sat, 29 Jul 2017 12:46:25 -0500
List-post: <mailto:towertalk@contesting.com>
Unfortunately many folks don't know plated vs galvanizing. Plated is shiny and dead easy to screw a nut onto a bolt. Good galvanizing looks dull gray if it has been any  reasonable time since galvanized and is often a little more friction when putting a nut on a bolt.  For the neophyte... Galvanized fasteners look more primitive, less perfect in appearance but far superior in how long till they may rust. Zinc plated is very inferior to galvanized hardware in longevity while exposed to the environment.

Patrick        NJ5G


On 7/29/2017 11:27 AM, Rob Atkinson wrote:
I've heard that you have to be careful sourcing hardware for a tower,
especially from a non-tower manufacturer.  It has to do with the
galvanizing.  From what I've been told, the non-tower intended
hardware has shall we say, "casual galvanizing" and the tower stuff is
galvanized to be up in a hard to get to place for a long time.

Rob
K5UJ
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>