T2X etc are four 1/4-20 bolts in a 3" square pattern.
Yaesu 2800 specifies four m8 x 1.25mm bolts in a 84mm sq (3.307") a
119mm dia bolt circle
Orion2800 is four 3/8-24 bolts in a 3" sq. but you need to check the fit
in the tower.
Some drilling required.
Grant Kz1W
On 12/1/2018 12:15 PM, Kim Elmore wrote:
I'm investigating rotor that will fit the same bolt pattern as a T2X but
that are a bit beefier. Mine works well, but in windy conditions, I
can't turn may antennas due to wind imbalance. What beefire rotators
will accommodate the same bolt pattern?
Kim N5OP
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|