Towertalk
[Top] [All Lists]

Re: [TowerTalk] Galvenized Monopole Foundation

To: towertalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] Galvenized Monopole Foundation
From: Steve Maki <lists@oakcom.org>
Date: Tue, 4 Aug 2020 22:10:58 -0400
List-post: <mailto:towertalk@contesting.com>
BTW on one of the other collar faces you could clamp a heavy duty gin pole to make life easy.

-Steve K8LX

On 08/04/20 21:49 PM, Steve Maki wrote:

I would plan on mounting the rotator and mast outside of the pole, rather than inside.

I'd install a couple of "ring collars" - off the shelf weldments used in the cell business - one at the pole top, and one down 6' or so. To that you clamp a 4" or 5" pipe mount, which can be plumbed with no trouble.

Then to this pipe you can attach shelves at any height - one for the rotator, and a couple for thrust bearings for example. You can make this as heavy duty as you want, mostly with off the shelf parts - just a little ingenuity and fab work required.

BTW the ring collars come with three faces for clamping stuff, so you could have some fixed yagis just below the tower top facing in favorite directions.

Anyway, it gives you way better flexibility and serviceability than having stuff inside the pole.

-Steve K8LX

On 08/04/20 20:06 PM, Jonathan - KE0YBL via TowerTalk wrote:

Yep, planning on a small crane. Not sure this type of flange is ideal for a buried pier footing. I've not found specific details on those beyond conceptual, though.

Also planning to fabricate a cross brace inside for rotator and also for thrust bearing, and perhaps a fiberglass cover... Unless I can find something field tested by others. Thanks for the reply.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>