On 2021-05-26 9:58 AM, CEPitts wrote:
> Hi Mark my small metal caliper measures at 1 and 7/8" or 27mm....if it
> is off it only by 1mm according to my handy little caliper.
The TB3 is specified to support masts up to 2" OD. Probably between
2 1/16" and 2 1/8" (53 - 54 mm).
73,
... Joe, W4TV
On 2021-05-26 9:58 AM, CEPitts wrote:
Hi Mark my small metal caliper measures at 1 and 7/8" or 27mm....if it
is off it only by 1mm according to my handy little caliper. If others
respond hopefully they confirm what I have provided. Charle4s "Ed" K5OF
in NC
Hello group!
Could someone here give me the precise inside diameter of this bearing?
Quick
checks in the Rohn catalog (over 230 pages) I was unable to find it.
Thanks!
Regards,
Mark, K1RX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|