On 6/18/2024 8:05 AM, Joe Subich, W4TV wrote:
Unfortunately, I do not see dimension specifications for the
contacts ... only the body, threads and *internal* dimension
of the pin.
Wikipedia <https://en.wikipedia.org/wiki/UHF_connector>
gives the center pin of the PL-259 as "approximately 0.156
inch (4mm) diameter".
The definitions for many (most?) connectors are part of IEC Standards.
That usually means that they are quite well defined by competent
engineers. Unfortunately, IEC Standards also cross-reference each other,
and are so expensive that only mfrs can afford to buy them, and you
can't read them if you haven't paid up.
Anyone can buy an AES Standard from the AES website, last I looked, for
$10, free for AES Members.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|