Hi Russ!
I have the new version Down East Microwave transverters for 144, 222,
432, 902/903, and 1296 MHz. Very sensitive/low noise, decent filtering &
LO stability, coming option for 10 MHz LO lock.
All running very well using the split transverter ports ( XVRX and XVTX
) and PTT out on both my FLEX-1500 and FLEX-5000.
I'm also setting up for 2304 MHZ and above using the Down East Microwave
"144-28 Microwave Interface" board.
All transverters are selected via a home brew 3 circuit switch for RX,
TX, and PTT.
73
Lloyd - N9LB
On Wed, Jul 18, 2012 at 12:25 PM, Russ Hines wrote:
> Hello all:
>
> I'm getting back into VHF/UHF contesting and wanted to know what you
> all thought about the best transverters available today. Last time I
> was involved ion this area, Microwave Modules was the "cat's meow," so
> it's been a minute. ;-)
>
> BTW, using Flex 1500 as IF radio.
>
> Tnx es 73,
> Russ
> WB8ZCC
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|