VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] 2M Sprint Monday night 9/23

To: VHFcontesting@contesting.com, NEWSVHF@mailman.qth.net
Subject: Re: [VHFcontesting] 2M Sprint Monday night 9/23
From: "Ron Klimas WZ1V" <wz1v@sbcglobal.net>
Reply-to: wz1v@sbcglobal.net
Date: Mon, 23 Sep 2013 11:10:13 -0400
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Actually tonight's exchange is call and 4 digit grid. 
6 digits required for microwave only, see Rule 3: 

3. Exchange:
Call signs and Grid-square lo
cator. Signal report optional.
Microwaves require the full 6 characters
of the grid square. Such as EM94LV

-73, Ron WZ1V, FN31

----- Original Message -----
From: George Sintchak <wa2vnv@optonline.net>
To: VHFcontesting@contesting.com, NEWSVHF@mailman.qth.net
Date: Sun, 22 Sep 2013 14:34:47 -0400
Subject: [VHFcontesting] 2M Sprint Monday night 9/23

> Remember the 2-meter Sprint is Monday night, 9/23,  7-11 PM.
> 
> Exchange is call sign + 6 digit grid location. 
> 
-------------------------------------------------------------------------------------------
> FYI: Rule 7.0 has changed due to request by many at the SE VHF conference.
> 
> 7. Use of telephone, packet or internet methods to schedule contacts 
during the
> 
> contest is acceptable. The telephone, packet or internet channel will not 
be used
> 
> while the contact is in progress. No "OK I am hearing you now" over the 
alternate
> 
> channel. The alternate channel will not be available in any way to the 
operator
> 
> during the contact. The complete exchange of call signs and grids must be
> 
> accomplished on the relevant amateur radio band.
> 
> http://www.svhfs.org/2013fallsprintrulesv1.pdf
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
> 
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>