VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] Panadaptor IF Buffer boards located

To: "Tom Holmes" <tholmes@woh.rr.com>, "'Huff David J'" <HuffDavidJ@JohnDeere.com>, <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] Panadaptor IF Buffer boards located
From: "Steve \(K1IIG\)" <stephen.tripp@snet.net>
Reply-to: "Steve \(K1IIG\)" <stephen.tripp@snet.net>
Date: Wed, 26 Apr 2017 10:49:45 -0400
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
THANKS TOM, 
IT SHOULD HAVE BEEN WA5VJB .

Steve


Steve...

I think you meant to type wa5vjb@flash.net.



Tom Holmes, N8ZM

-----Original Message-----
From: VHFcontesting [mailto:vhfcontesting-bounces@contesting.com] On Behalf
Of Steve (K1IIG)
Sent: Wednesday, April 26, 2017 8:03 AM
To: Huff David J <HuffDavidJ@JohnDeere.com>; vhfcontesting@contesting.com
Subject: [VHFcontesting] Panadaptor IF Buffer boards located

 After contacting a couple of hams in England I found that Kent, WA5VJB has
some of the G4HUP Pat buffer boards. He had a complete IF buffer board for
my TS-2000 for $25. He also has a bunch of kits. You can reach him direct at
WA5VJB@flash.net or go to his web site. He also makes other interesting
items including printed circuit log antennas for vhf and uhf. 

73's
Steve K1IIG


There are many people now using the SDRPlay RSP1 or RSP2 units for the idea
of a panadapter, because it has a wider and better receiver than some of
those RTL USB devices.  Note that they also have better front end protection
on the RSP units than most.  

If you use a SDR receive only device like this, you might want to look into
the front end protection devices listed on the blog below, some of which are
just off the shelf purchases.  Place it on the receive antenna input of your
SDR.
<http://www.kb6nu.com/protect-receiver-inputs/>
<http://www.ad5x.com/images/Articles/FrontEndProt.pdf>
Thanks,
David
W0IM
 
On Sat, Apr 22, 2017 at 7:07 PM,  <arsn4dd@charter.net> wrote:
> Do any of the seasoned veterans have a suggestion for incorporating a
> freestanding VHF/UHF panadapter into a casual contesting environment?


I do NOT have one, but I believe there is a way of using a (cheap) SDR
for this.  You'd have to keep your transmitted RF out of its little
ears, but ...


-- 
Peter Laws | N5UWY | plaws plaws net | Travel by Train!
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>