Use the 13 pin data connector for audio in and out. See
http://www.qsl.net/k0bx/
Works great on both my 850 and 950. Fully interchangeable.
73 de Mike, W1NR
-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com]On Behalf Of Peter's Mail
Sent: Saturday, November 16, 2002 10:03 AM
To: 'Writelog'; DX 4 Win List Server
Subject: [WriteLog] TX audio Kenwood 950S Interface ?
Hi folks,
Looking for input (no pun) on best way to interface TX audio from
computer sound card with TS950-S - I have the radio shack xfomer 1K:8
ohm - I also want to use my Heil Pro head Set and or the Heil Classic -
Tried to couple via the mic connector with both in parallel but loaded
down the Heil. Also tried the Patch input but audio level too low. Any
other tried and proven methods with this setup.
TIA
&3
REN WB3FSR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|