Sounds like the same problem I had until I kept reading in the help
file. In the CW/RTTY/SSB messages section, make sure to check the box
down in the lower right for "SSB". Then go to "Save Configuration" and
do that. I think that may be what's wrong.
Rich KJ6RA
-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com] On Behalf Of Thomas Jednacz
Sent: Saturday, November 16, 2002 8:10 AM
To: Irwin Darack; Writelog
Subject: RE: [WriteLog] Sound Card DVK
Do you have wave files installed for all the numbers and letters so
Writelog can sound out the call sign?
Tom, W7QF
-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com]On Behalf Of Irwin Darack
Sent: Saturday, November 16, 2002 8:09 AM
To: Writelog
Subject: [WriteLog] Sound Card DVK
I am setting up the DVK for todays sweepstakes using my Windows Sound
Card with Writelog. In SSB mode I can send wave files with no problem,
but when I want to send the other stations call and the contact serial
number, I get an error that they cannot be found.
%C<msg1.wav>%1<msg2.wav>
This should send the other stations call , wave file, contact serial
number and my exchange. It sends the wave files followed by nothing
else.
Computer is running Windows XP. Any help would be appreciated.
--- StripMime Report -- processed MIME parts --- multipart/alternative
text/plain (text body -- kept)
text/html
---
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|