WriteLog
[Top] [All Lists]

[WriteLog] MMTTY 1.64

To: <writelog@contesting.com>
Subject: [WriteLog] MMTTY 1.64
From: aa5au@bellsouth.net (Don Hill AA5AU)
Date: Sun Feb 9 19:18:51 2003
1.62 is the answer when using WriteLog.  It's not necessarily an MMTTY
problem.  It's got something to do with the way WriteLog and MMTTY work
together.

I used 1.62 for over 1800 QSO's and absolutely no failures or glitches of any
kind when running high power.

73, Don

----- Original Message ----- 
From: "Dave Hachadorian" <k6ll@juno.com>
To: <writelog@contesting.com>
Sent: Friday, February 07, 2003 5:29 PM
Subject: [WriteLog] MMTTY 1.64


> In a previous msg (below) AA5AU reported a problem with
> MMTTY 1.63b. I tried the v1.64 engine (MMTTY.exe), as a
> Writelog plug-in, for two hours tonight in the WPX, and
> it did the same thing. It did it twice in two hours. It
> seemed to fix itself in about 1 or 2 minutes.
> 
> Switched back to 1.62, with no problems.
> 
> Dave Hachadorian, K6LL
> Yuma, AZ
> 
> AA5AU wrote:
> ------------------------------------------------------------------------
> The problem experienced in the ARRL RTTY Roundup by several WriteLog
> users running the MMTTY plug-in for WriteLog and the 1.63 engine was that
> on occasion when an F key was pressed to send a message, the transmitter
> would
> key briefly, then unkey.  The only way to get it going again was to wait.
>  Eventually,
> after a minute or two, the buffer keys would work again.
> 
> I'm sorry to say that 1.63b does the same thing.  Although it doesn't
> happen often,
> it does happen. 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> 

<Prev in Thread] Current Thread [Next in Thread>