DlPortIO or DirectIO should work. It should be transparent to WriteLog. They
are drivers that make the port available to the user level and should have
nothing to do with the application program which should have no idea why
suddenly LPT ports are visible, they just are.
I have used it on WriteLog and it works.
I do not remember all of the setup but documentation is there. I no longer
bother with LPT, have plenty of COM ports.
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com]On Behalf Of Bob
> Sent: Tuesday, May 06, 2003 1:32 PM
> To: Writelog
> Subject: [WriteLog] RE: [Write Log] UserPort
>
>
> Thank you to all who replied back to me on this issue.
>
> I have been able to get LPT1 to show up in WL config screen but
> still no CW
> keying.
>
> As a comparison, N1MM worked properly using DLPORTIO. DLPORTIO is
> freeware.
>
> I believe the problem with UserPort is that it is not properly controlling
> the DX Doubler SO2R box I am using. In order for my DXD box to work with
> N1MM/DLPORTIO I need to switch the DXD box to auto on the xmit side. When
> using WL with UserPort and throwing the DXD xmit switch to auto causes the
> radio to key up constantly but never any CW keying.
>
> I suppose it would be too difficult to make WL work with DLPORTIO or would
> it? Of course, that would probably mean anyone who paid for DirectIO would
> no longer be able to use it any longer.
>
> Is anyone using UserPort with a DXD SO2R box ?
>
> Thanks!
>
> 73 - Bob
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com]On Behalf Of VA3MW - Port Credit
> Sent: Friday, May 02, 2003 8:29 PM
> To: Bob Lafont; Writelog
> Subject: Re: [WriteLog] UserPort
>
>
> Bob
>
> This is what my INI file looks like. I spent 2 full days
> debugging this. I
> use USERPORT as well.
>
> I also added the line CW_ON_PIN1=1 to get rid of chopping sending.
>
> Mike
>
> [Ports]
> COM1:=9600,n,8,1
> COM2:=9600,n,8,1
> COM3:=9600,n,8,1
> COM4:=9600,n,8,1,p
> dvktype=2
> dvkport=0
> cwtype=2
> cwport=6
> dvkstoploop=1
> dvkechomic=1
> Comm3Used=USED,POLL,34
> Comm3RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm3Baud=19200
> Comm3XmitControl=ALWAYS
> CWPTTCONTROL=1
> CWPTTDELAY=0
> CW_ON_PIN1=1
>
>
> ----- Original Message -----
> From: "Bob Lafont" <bob@wa2mno.ampr.org>
> To: "Writelog" <writelog@contesting.com>
> Sent: Friday, May 02, 2003 8:12 PM
> Subject: RE: [WriteLog] UserPort
>
>
> > Actually, this is a re-installation of WL so the writelog.ini file is
> > bare-bones. No other LPT config statements exist in the config.
> >
> > Also, Device Manager shows LPT1 as 0x0378-0x037F and 0x0778-0x077B.
> > 0x0378-0x037F is what is configured in UserPort. I also tried
> 0x0778-0x077B
> > but that could not be accepted.
> >
> > LPT2 still shows as the active LPT port in WL.
> >
> > Do people have this kind of difficulty with Direct-IO ?
> >
> > Bob
> >
> > -----Original Message-----
> > From: VA3MW [mailto:va3mw@rogers.com]
> > Sent: Friday, May 02, 2003 5:07 PM
> > To: Bob Lafont; Writelog
> > Subject: Re: [WriteLog] UserPort
> >
> >
> > Try deleting all the LPT entries in writelog.ini.
> >
> > That was the only way I got it to work.
> >
> > Mike
> > ----- Original Message -----
> > From: "Bob Lafont" <bob@wa2mno.ampr.org>
> > To: "Writelog" <writelog@contesting.com>
> > Sent: Friday, May 02, 2003 1:01 AM
> > Subject: [WriteLog] UserPort
> >
> >
> > > I am running XP and cannot get UserPort to work properly.
> Following the
> > > instructions provided by UserPort I added LPT1 with 0x378-0x37B. After
> > > selecting Update, Start and Exit and starting WriteLog I find
> that LPT2
> is
> > > selectable in the setup screen, not LPT1. When I select both
> CW and DVK
> > > using LPT2 the sound card generates audio just fine but when switching
> to
> > CW
> > > I cannot get it to generate at CW at all.
> > >
> > > Any ideas on what my problme might be?
> > >
> > > Bob /wa2mno
> > >
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > >
> >
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
> >
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|