Very simple!
When doing S + P he hits F5 and then having received a QSL(!)
for the outgoing exchange CTRL-Enter! This what I always do
when in S+P (using F7 instead of his F5).
73 de Goetz
dj3iw@t-online.de
----- Original Message -----
From: "Jim Brown" <jim@audiosystemsgroup.com>
To: <WriteLog@contesting.com>
Sent: Saturday, January 31, 2004 5:27 AM
Subject: Re: [WriteLog] Function keys
> On Wed, 28 Jan 2004 16:36:41 -1000, S. Sneidar wrote:
>
> >F1 CQ - Run mode
> >F2 Response and report - Run mode
> >F3 QSL/QRZ - Run mode
> >F4. Call someone - search and pounce mode
> >F5 Response and report - search and pounce mode
> >F6 Your call again?
> >F7 Your report again?
> >F8 My call repeated several times
> >F9 My report repeated several times
> >F10 Worked B4
>
> Something that has always bothered me about this setup is, How do you
> operate Search and Pounce with F3 programmed for QSL/QRZ? To save a
> QSO, you have to hit <ENTER>, and when you do, WL sends the QSL/QRZ
> message. But when you're running S&P, you don't want to send anything
> at that point, and if you do, you drive the other guy nuts! I've
> solved this by leaving <F3> blank and using a different memory for
> QSL/QRZ.
>
> Jim K9YC
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|