Dick,
It is definately something to do with the new v10.56C. As a test, I
reverted to v10.55D, and the problem disappeared.
BTW, I have noticed, in the past, that when quickly tuning the radio up or
down, the "No Rig" notice would appear very briefly, but then the correct
frequency would always come up. Under 10.56C, it seems that once the "No
Rig" appears, it stays.
Maybe someone on the group will have comments or a fix, or maybe a patch is
needed.
Jim W4LC
----- Original Message -----
From: "Dick Thompson" <wb0dul@adelphia.net>
To: "'JE Brown'" <W4LC@fuse.net>
Sent: Friday, December 02, 2005 15:50
Subject: RE: [WriteLog] Possible Problem with 10.56C
> Well, it was just a WAG (Wild A** Guess), Jim. Sometimes some
> suggestions work. I have WL ver. 10.54C. If I see a major change in
> some later version I'll buy an upgrade subscription. Hope you get it
> resolved.
>
> Dick WB0DUL
>
>
>
> -----Original Message-----
> From: JE Brown [mailto:W4LC@fuse.net]
> Sent: Friday, December 02, 2005 8:32 AM
> To: Dick Thompson
> Subject: Re: [WriteLog] Possible Problem with 10.56C
>
>
> Dick,
>
> I checked out your suggestion. However, FSK is already selected, so it
> must be something else. I never saw this problem on previous editions
> of Writelog.
>
> Jim W4LC
>
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|