One thiing I did was change the baud rate from Auto to 9600 baud on
rigs, and the program that seems to help. It still disapears every once
in a while but not as bad. Never did that before I upgraded.
--
73
Steve AI9T
http://www.ai9t.com
QSL via LOTW and EQsL
JE Brown wrote:
>Stevem
>
>Exactly. Slow tuning seems to help. Tune quickly and the rig disappears. I
>have found that going into port setup, then out again will restore the freq.
>Looks like a patch is needed.
>
>Jim W4LC
> ----- Original Message -----
> From: Steve AI9T
> To: JE Brown
> Cc: Dick Thompson ; Writelog@contesting.com
> Sent: Saturday, December 03, 2005 04:38
> Subject: Re: [WriteLog] Possible Problem with 10.56C
>
>
> Having the same problem here with the new version here. Having to keep an
> eye on it during the TARA contest. Every time it looses rig have to save
> configuration to get it back. Like the com port is going on and off.
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|