WriteLog
[Top] [All Lists]

Re: [WriteLog] Contest problems with WriteLog

To: writelog@contesting.com
Subject: Re: [WriteLog] Contest problems with WriteLog
From: Bob Boehmer <bboehmer@gmail.com>
Date: Wed, 6 Oct 2010 08:46:41 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
As I recall, when I noticed this problem the contact was indeed logged
before the exchange had been sent.  I don't know what triggered it to
be logged, though.  I do not think that I had hit the Enter key or
selected another callsign.  I never noticed this while running, only
on S&P reports.  And typically I won't be selecting another callsign
in the middle of an S&P contact.  I do think that the problem usually
occurred during a Q where I had selected the callsign from the bandmap
window.

73
Bob KG3F


On Tue, Oct 5, 2010 at 3:21 PM, Mike Heideman <mike_heideman@hotmail.com> wrote:
>
> I've observed the same behavior many times on CW and RTTY.  It happens when 
> you log the QSO before the exchange message has finished sending the other 
> station's callsign.  Hitting the message key again will send the full correct 
> message.  I suspect this is a WL bug since I can't imagine why this behavior 
> would be desired.
>
> This most frequently happens to me on CW while running when using a single 
> radio and I copy a second callsign and want to type it before I forget it. 
>  In a contest such as CQWW where the exchange is predictable I'll hit F2 to 
> send the exchange then immediately hit Enter or Ctrl-Enter to log the QSO, 
> anticipating that the other station will simply send the prefilled exchange. 
>  As I prepare to type in the other callsign the CW stops after sending the 
> first callsign.  Hitting F2 again resends the whole exchange to the first 
> station.
>
> It could be that hitting Enter while a message is being transmitted is what 
> triggers this weird behavior.  If Enter is hit after the callsign has been 
> sent then the remainder of the message is successfully transmitted.  There 
> may be other scenarios that cause this.  I avoid using the mouse during all 
> contests so I always type in callsigns even in RTTY contests and run into the 
> same problem on RTTY.
>
> -Mike, N7MH
>
> Bob KG3F wrote:
>> I saw the same problem that AI9T describes below. Our S&P report
>> macro would often send only the callsign and then sit there diddling.
>> I never thought to try and hit the key again to see if it would then
>> send the report. I ended up using ALT-K to send the report.
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>