WriteLog
[Top] [All Lists]

Re: [WriteLog] WL and SmartSDR integration - Bandmap / WL not sending ri

To: Keith Goobie <keith@goobie.org>
Subject: Re: [WriteLog] WL and SmartSDR integration - Bandmap / WL not sending right mode to SmartSDR/6500
From: joeduerbusch <k0bx@arrl.net>
Date: Fri, 2 Oct 2015 15:06:13 +0000
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Keith, I suggest that you connect to dxspots.com in the telnet window and
make sure that DXTelnet isn't the cause of your problem.

Joe K0BX


#1 Honor Roll Mixed
Honor Roll RTTY
5BDXCC Plus 30,17,12
5BWAS


Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk)
without my permission.

On Fri, Oct 2, 2015 at 1:20 PM, Keith Goobie <keith@goobie.org> wrote:

> Hi All
>
> We have the following configuration at the VE3FJB contest station.
>
> Flex ­ 6500 / SmartSDR 1.5
> WL 11.29b, patched with Flex Driver 11.30b
> DDUtil ­ latest ­ while not required, it is used for amp and steppir
> frequency tracking
>
> Using this set of components, we can set mode / freq correctly from the QSO
> entry window, but not from the Bandmap or the Packet DX Spot windows.
>
> We use DXTelnet ­ supported by Writelog and we only pass along what we
> think
> are digital mode spots.  It is configured in DXTelnet.  Starting mode in
> SmartSDR is RTTY and it is populated into WL QSO entry window.
>
> Spots get populated in the Bandmap and Packet windows.   WL is clearly
> running in FSK / RTTY mode and SmartSDR is 1.5 with all the RTTY
> enhancements.
>
> If you are using the QSO Entry Window to set the frequency / mode, it will
> perform correctly and pass along a freq/FSK mode set as a freq/RTTY for the
> SmartSDR package.  All is good.
>
> Things go afoul when you are seeing a spot in the BandMap or the Packet
> spot
> window.  Double clicking the spot in either will set it to the right
> frequency but in the CW mode.  Clicking on Mode Change or Alt F1 will take
> it to FSK/RTTY mode on the right frequency, but sometimes the mode is
> correct, but the frequency is wrong.
>
> What is the latest versions of the downloadable components?  What are the
> 6500 users seeing?
>
> BTW, thanks for all the integration ­ looking grand.
>
> Thanks all
>
> Keith / VA3YC for
> VE3FJB
>
>
> --
> keith@goobie.org
> Keith Goobie
> Richmond Hill, ON, CANADA
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>