Joe
Thanks for the guidance so far.
I removed the DXTelnet application and the software hook to make it work
with WL. I enabled the embedded telnet cluster client functionality and it
will connect and display cluster spots there is no filtering and that can
be adjusted later.
Spots that had RTTY or PSK in the description / comment field will populate
the bandmap and the packet spot list.
Clicking on the spot in either will take the radio into RTTY mode and assign
the right frequency. Those that do not have comments/detail are either
assigned to be CW or PH mode depending on the frequency.
I would like to be able to adjust or re-build the band summary so that a
spot within certain limits will be automatically assumed to be CW or RTTY or
SSB.
Or maybe a batter question where can I change the feature / functionality
available to the embedded cluster client so that I can pick and choose (the
type of spots and how it is communicated to WL/SmartSDR via the cluster
client I know that it can be done on the server.
Comments / guidance?
Thanks in advacnce
Keith VA3YC
On 10/2/15 11:06 AM, "joeduerbusch" <k0bx@arrl.net> wrote:
> Keith, I suggest that you connect to dxspots.com <http://dxspots.com> in the
> telnet window and make sure that DXTelnet isn't the cause of your problem.
>
> Joe K0BX
>
>
> #1 Honor Roll Mixed
> Honor Roll RTTY
> 5BDXCC Plus 30,17,12
> 5BWAS
>
>
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk) without
> my permission.
>
> On Fri, Oct 2, 2015 at 1:20 PM, Keith Goobie <keith@goobie.org> wrote:
>> Hi All
>>
>> We have the following configuration at the VE3FJB contest station.
>>
>> Flex 6500 / SmartSDR 1.5
>> WL 11.29b, patched with Flex Driver 11.30b
>> DDUtil latest while not required, it is used for amp and steppir
>> frequency tracking
>>
>> Using this set of components, we can set mode / freq correctly from the QSO
>> entry window, but not from the Bandmap or the Packet DX Spot windows.
>>
>> We use DXTelnet supported by Writelog and we only pass along what we think
>> are digital mode spots.? It is configured in DXTelnet.? Starting mode in
>> SmartSDR is RTTY and it is populated into WL QSO entry window.
>>
>> Spots get populated in the Bandmap and Packet windows.? ?WL is clearly
>> running in FSK / RTTY mode and SmartSDR is 1.5 with all the RTTY
>> enhancements.
>>
>> If you are using the QSO Entry Window to set the frequency / mode, it will
>> perform correctly and pass along a freq/FSK mode set as a freq/RTTY for the
>> SmartSDR package.? All is good.
>>
>> Things go afoul when you are seeing a spot in the BandMap or the Packet spot
>> window.? Double clicking the spot in either will set it to the right
>> frequency but in the CW mode.? Clicking on Mode Change or Alt F1 will take
>> it to FSK/RTTY mode on the right frequency, but sometimes the mode is
>> correct, but the frequency is wrong.
>>
>> What is the latest versions of the downloadable components?? What are the
>> 6500 users seeing?
>>
>> BTW, thanks for all the integration looking grand.
>>
>> Thanks all
>>
>> Keith / VA3YC for
>> VE3FJB
>>
>>
>> --
>> keith@goobie.org
>> Keith Goobie
>> Richmond Hill, ON, CANADA
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:? http://www.writelog.com/
>
>
--
keith@goobie.org
Keith Goobie
Richmond Hill, ON, CANADA
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|