Re: [WriteLog] M2 mult station setup

[K3RAG LB3RE Brobakken <post@lb3re.com>]

Hello
Setup M2=
You must set first network.
Then set serial by Band.
Then identify which radio is which one to log this.
Radio 1 is 0 in cabrillo
Radio 2 is 1 in cabrillo.
If running 3rd mult station you must edit thisone manually in cabrillo to 1 or 
0 after contest.
There is no tracking of bandchange in M2 in Writelog... i asked like 7 years 
for this....
73 LB3RE Rag mandag, 13 juni 2016, 00:05a.m. +02:00 from kostas sv1dpi  
sv1dpi@otenet.gr :

>We want to use Writelog in M2 category in contests like cq wpx. It is 
>allowed to have 2 signals on the air every time.
>
>Our plan is to have 2 running stations and 1 multiplier station.
>
>Example: The 2 running stations will be on 15 and 20m for example and 
>the multi station on 10 or 40m.
>
>It's allowed 8 band changes for every station. So the multi station (if 
>the run has a good rythm) can get maximum 4 stations every clock hour 
>for the run1 and 4 more for the run2.
>
>How can I say to writelog that the mult station is used as mult1 (mult 
>for the run1 station) or mult2 (mult for the run2) station every moment 
>to be according the allowed band changes?
>
>73 Kostas SV1DPI
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/