Hi, Gordon.What does "keys and stays keyed" mean? PTT or CW keying? Which CW
generation method is selected in WL?73,Ed W0YK
-------- Original message --------From: Gordon LaPoint
<gordon.lapoint@gmail.com> Date: 5/2/21 06:48 (GMT-08:00) To: WriteLog
<writelog@contesting.com> Subject: [WriteLog] CW Problems. Hi, I'm setup for
the NEQP, SSB works fine. when I switch to CW the radio keys and stays keyed,
can not find what I have setup wrong.Radio - Kenwood TS590sg Ports set to
COM18 115200 - works fine, tracks radio frequency/modeCW - COM 7 DTR= CW
RTS= PTTCW Options:PTT Control (CW Mode ONLY) None (QSK) selected (tried
"as specified in Ports", no difference)PTT to CW delay 0PC generates sends CW
space on startup - Checked (also tried unchecked - no difference.What else
should I check?This used to work, so don't know what changed except upgraded to
12.59F , so downgraded to 12.56c, no change.The same hardware setup works with
N1MM and DX Labs, so I know the hardware is good!!!!Thanks,Gordon -
N1MGO_______________________________________________WriteLog mailing
listWriteLog@contesting.comhttp://lists.contesting.com/mailman/listinfo/writelogWriteLog
on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|