| To: | topband@contesting.com |
|---|---|
| Subject: | Re: Topband: K9ay loop not performing |
| From: | Rob Atkinson <ranchorobbo@gmail.com> |
| Date: | Wed, 11 Dec 2019 06:38:25 -0600 |
| List-post: | <mailto:topband@contesting.com> |
Actually, if you have a quarter wave driven element and you are disconnecting it at the feedpoint, your relay concern shouldn't be voltage so much as current. Fast switching and large contact surface is more important than voltage handling. 73 Rob K5UJ _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: K9ay loop not performing, Victor Goncharsky via Topband |
|---|---|
| Next by Date: | Re: Topband: K9ay loop not performing, Raoul Coetzee via Topband |
| Previous by Thread: | Re: Topband: K9AY Loop not performing, Michael Walker |
| Next by Thread: | Re: Topband: K9ay loop not performing, Raoul Coetzee via Topband |
| Indexes: | [Date] [Thread] [Top] [All Lists] |