On 4/8/2021 2:55 PM, Artek Manuals wrote:
Is that "SOLID" copper center conductor or the Copper plated aluminum as
is the case with LMR400 these days...8^(
I said exactly what I meant -- solid copper center.
On 4/8/2021 7:45 PM, Jim wrote:
> Bite the bullet... Andrew / Comscope LDF4-50. Lasts forever!
All my antennas on towers are fed with 1/2-in or 7/8-in hard line, all
of it used or reel ends. All of it lays on the ground, then goes up the
tower when it splices to the rotator loop/choke/antenna feed.
73, Jim K9YC
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|