Rick's point is well made. Take a look at these measurements from about 10
years ago.
https://www.k7tjr.com/coaxial_tests.htm
Lee K7TJR OR
-----Original Message-----
From: Topband <topband-bounces+k7tjr=msn.com@contesting.com> On Behalf Of
Richard (Rick) Karlquist
Sent: Friday, February 4, 2022 2:03 PM
To: VE6WZ_Steve <ve6wz@shaw.ca>; David Olean <k1whs@metrocast.net>
Cc: topband <topband@contesting.com>
Subject: Re: Topband: F connector how-to video
On 2/4/2022 8:58 AM, VE6WZ_Steve wrote:
> When you find a cable that you like, stick with it!
Before falling in love with a cable, it is worthwhile to check its impedance
accuracy vs frequency and its low frequency loss and the consistency of its
velocity factor. Once you do this, you will never again buy cable from the big
box stores, no matter how easy it is to put on F connectors.
73
Rick N6RK
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|