| To: | <towertalk@contesting.com> |
|---|---|
| Subject: | [TowerTalk] Hole Alignments |
| From: | brucecom@shore.intercom.net (James D. Bruce) |
| Date: | Mon, 18 May 1998 23:01:10 -0400 |
What is the best way to mark and drill holes in a straight line along an alumimun tube? Also drilling thru to the other side of the tube straight? An example would be 2 holes along the axis of an element for a U-bolt. It seems that I never get it correst and end up enlarging the holes to get hardware to fit. Thanks, Jim Bruce/ NV3V brucecom@shore.intercom.net -- FAQ on WWW: http://www.contesting.com/towertalkfaq.html Submissions: towertalk@contesting.com Administrative requests: towertalk-REQUEST@contesting.com Problems: owner-towertalk@contesting.com Search: http://www.contesting.com/km9p/search.htm |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [TowerTalk] Mystery Beam, Paul Booth |
|---|---|
| Next by Date: | [TowerTalk] Butternut Verticals, David Jones |
| Previous by Thread: | [TowerTalk] Hole Alignments, Scott Bullock |
| Next by Thread: | [TowerTalk] Hole Alignments, Gerald Caouette |
| Indexes: | [Date] [Thread] [Top] [All Lists] |