Towertalk
[Top] [All Lists]

[TowerTalk] FW: Max antenna weight

To: <towertalk@contesting.com>
Subject: [TowerTalk] FW: Max antenna weight
From: "Matt" <maflukey@gmail.com>
Date: Sun, 1 Nov 2015 17:01:32 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi Dave,

I don't recall where I got this from, but in some of my notes I wrote down
the following limits that were listed for a T2X:

Max vertical thrust: 1,000 lbs
Max boom:  45 ft
Max turning torque: 1,000 in-lbs
Max brake torque:  7,000 in-lbs

Hope this helps & good luck on your project.

Matt
KM5VI



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Dave
Leisman
Sent: Sunday, November 01, 2015 2:16 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Max antenna weight




I have a HyGain Tailtwister rotor mounted inside seven sections of Rohn 45.
I plan on placing a 10 foot mast into the rotor (2" O.D. 
galvanized steel pipe), through a heavy duty thrust bearing, and on the
mast, a HyGain TH-11 (not exactly a featherweight itself).  
My question is:  How much weight will the Tailtwister rotor handle? 

Is potentially this too much weight?  I have been told that the HyGain
rotors will handle up to 1000 lbs of weight.  While I'm not close tot hat
weight, this is a heavy amount.  Any help would be appreciated. 

Thanks in advance,

Dave, W8QW
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>