The twisting of the strands over the "live" side is an excellent and the
strongest way (that I know of) of terminating the EHS guy wire rather
than clamps. The negative aspect is it takes a lot more work and time.
The good aspects are there is no extra costs except for the thimbles.
There is a name for this process, but I have forgotten it. I'm sure
there are members on here who can give us the proper name. There are
pictures on the net on how to properly do the winding if you have the
name to search on.
You can make a simple tool that is nothing more than a hole large enough
for a single strand of the EHS to slip through. The hole is drilled
through a quarter inch thick bar stock although 1/8th inch is probably
thick enough.
To wrap the strands of 1/4" or 3/8ths inch EHS, takes strong hands and a
tough pair of leather gloves. To start, you may be only able to do a
few per day. Just remember, you are replacing the cost of the clamps
with labor.
If you don't have the conversion, there are 25.4 mm per inch.
73 and good luck,
Roger (K8RI)
On 12/13/2015 11:56 AM, Jim Lux wrote:
On 12/13/15 8:49 AM, Douglas Ruz (CO8DM) wrote:
OK,
I understand 100%.
Anyway, if someone here have experiences with solid steel wire...go
ahead.
I saw few mast installed with solid steel wire (1/4") here...they don´t
use clamps, they just twist the extra wire over the "live" side of the
wire.
It probably works. The question would be whether it untwists before
something else fails. it might well be "strong enough"
You could always do a test. get some wire, wrap it around something
sturdy, twist over the live side, then pull on it with a car or a
jack or a comealong and see what happens.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
73
Roger (K8RI)
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|