Towertalk
[Top] [All Lists]

Re: [TowerTalk] Coax Losses on 160 and 75?

To: jim@audiosystemsgroup.com, towertalk@contesting.com
Subject: Re: [TowerTalk] Coax Losses on 160 and 75?
From: jimlux <jimlux@earthlink.net>
Date: Sat, 06 Aug 2016 16:20:13 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
one of the Belden data sheets has the cladding thickness.  we were also looking 
to characterize the z of snow antenna made from plated piano wire.  
I just can't remember what the numbers are off the top of my head


Sent via the Samsung Galaxy S®6 active, an AT&T 4G LTE smartphone
-------- Original message --------From: Jim Brown <jim@audiosystemsgroup.com> 
Date: 8/6/16  10:02 AM  (GMT-08:00) To: towertalk@contesting.com Subject: Re: 
[TowerTalk] Coax Losses on 160 and 75? 
On Sat,8/6/2016 6:58 AM, jimlux wrote:
> So it depends on what kind of copper clad steel they're using in the 
> coax. 

Hi Jim,

I've not measured loss in copper clad coax, I'm going from Belden data 
sheets.

73, Jim K9YC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>