I have a Sanyo/Panasonic split. The compressor is 40' from the 89' 4L
SteppIR tower. 3 inside air handlers,no RFI.
Grant KZ1W
On 7/25/2018 17:10 PM, Keith Dutson wrote:
I installed an LG in my shack, near the two main stations, both with 1500
watt amplifiers. This is in addition to the American Standard central unit.
No interference has been observed. I cannot imagine the Mitsubishi unit
causing any significant interference, as it is one of the higher quality
units. Let us know what you find.
73, Keith NM5G
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Steve K7AWB
Sent: Wednesday, July 25, 2018 4:54 PM
To: TowerTalk@contesting.com
Subject: [TowerTalk] Mitsubishi interference?
I am considering a mits heat pump for the house. The shack would 20 or so
feet from the outside unit. In main rooms would be the wall mount units.
Mits literature has the usual warning of keeping so many feet from their
units for controlling interference
Do any of you use these units and have undesired effects? I had a ham
friend (sk) years ago put one in his shack and he never mentioned any
undesired effects to me.
The closest tower is about 130 feet away from the shack. Mits says they
have no rfi kits to add if needed.
Steve K7AWB
Steve k7awb
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|