Towertalk
[Top] [All Lists]

Re: [TowerTalk] Grounding

Subject: Re: [TowerTalk] Grounding
From: RCM <robrk@nidhog.net>
Date: Tue, 3 Sep 2019 17:47:55 -0400
List-post: <mailto:towertalk@contesting.com>

> On Sep 3, 2019, at 15:25, Jim Brown <jim@audiosystemsgroup.com> wrote:
> 
> On 9/3/2019 5:24 AM, Julio Peralta via TowerTalk wrote:
>> I've read that when using an 8' ground rod , the rods should be separated by
>> 2X the length of the rods or 16'. However unless I missed it I haven't seen
>> a distance mentioned for the first rods from the base.
> 
> If the tower base is a Ufer ground, 8-16 ft is a good spacing for the first 
> rods. If the base is not Ufer, I'd go for 8 ft. Either way, one to each leg.
> 
> 73, Jim K9YC
> _______________________________________________
> 
> 
> 
> _______________________________________________

Go here and download the R56 document.

Read all 516 pages. There will be a test.

Or just chapters 4 and 5.

http://www.repeater-builder.com/antenna/site-stuff/are-fifty-six-man-2005.pdf 
<http://www.repeater-builder.com/antenna/site-stuff/are-fifty-six-man-2005.pdf>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>