Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crimp connector tool

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Crimp connector tool
From: Mike Fahmie via TowerTalk <towertalk@contesting.com>
Reply-to: Mike Fahmie <wa6zty@yahoo.com>
Date: Tue, 7 Jan 2020 19:27:59 +0000 (UTC)
List-post: <mailto:towertalk@contesting.com>
 The link didn't come out on my previous post so here it is again;
https://www.ebay.com/itm/293344533565

-Mike-

    On Tuesday, January 7, 2020, 11:23:33 AM PST, Mike Fahmie via TowerTalk 
<towertalk@contesting.com> wrote:  
 
  I recently purchased this one via EBAY.  The dies are cut for metric lugs 
(mm²) but are fairly close to US sizes.  I haven't looked to see how close they 
may be for coax connectors though they are hex dies.  The die is fairly simple 
so if one has machining skills (and gear), it wouldn't be difficult to 
fabricate an exact die.
12 Ton Hydraulic Wire Cable Terminal Crimper Crimping Tool Pliers Kit w/ 9 Dies 
| eBay

| 
| 
| 
| $38.99 |  |

 |

 |
| 
|  | 
12 Ton Hydraulic Wire Cable Terminal Crimper Crimping Tool Pliers Kit w/...

Include 9 dies for free option so as to make your working smoother. 8 x Mould 
Right 10,16, 25, 35, 50, 70, 95, 1...
 |

 |

 |





    On Tuesday, January 7, 2020, 11:05:36 AM PST, Grant Saviers 
<grants2@pacbell.net> wrote:  
 
 The HF hydraulic press/die set is designed for ~#6 and larger electrical 
wire lugs so using it for coax crimps is probably not a good idea.

Worked great for home/shop use, I think about $75 for an identical unit 
on ebay/amazon.  Greenlee pro unit $1500.

Grant

On 1/7/2020 10:05, jimlux wrote:
> On 1/7/20 9:16 AM, Earl Wesner via TowerTalk wrote:
>> I saw a recent post on crimp tools for hex crimps on coax, which had a 
>> comment from a gentleman regarding physical ability to squeeze the 
>> crimper handle tight enough.
>>
>> It comes to mind that there is a tool available from Harbor Freight 
>> and others which uses a (small hydraulic) lever/pump which takes 
>> several strokes to close the dies, and which comes with assorted dies 
>> for small to quite large hex sizes. I got mine from Amazon: BETOOL 
>> 8020 is the item model..
>>
> 
> There are also pneumatically operated crimpers.
> 
> Nobody on an assembly line making hundreds of crimps a day is going to 
> use muscle power, unless they want to be doomed to disability payments 
> and OSHA fines for the repetitive stress injuries.
> 
> I've seen the hydraulic ones for things like battery lugs. I assume 
> they're available for coax connector size things.?? How expensive are 
> they? is it a $100 item or a $500 item.
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>