Amps
[Top] [All Lists]

[AMPS] 240VAC Amplifier Wiring

To: <amps@contesting.com>
Subject: [AMPS] 240VAC Amplifier Wiring
From: 2@vc.net (measures)
Date: Wed, 15 Nov 2000 08:17:45 -0800
>
>Rich says:
>
>>It is potentially dangerous not to connect the cabinet of U. S. built 
>>amplifiers to the Neutral wire. 
>
>Do you really mean this, Rich?
>
yes.  In the U. S. 0v/N connects to a ground rod at the mains box.  

>I would have thought it should read 'to the ground wire'.
>
>My preference is to run the neutral to the equipment if needed (i.e.for 
>120volt
>stuff) and the ground wire to the case. That means that major voltage drop in
>the neutral doesn't lift the cabinet above the bonding point potential at the
>supply inlet.
>
A major v drop in #4 Cu takes some doing.  

cheers, Peter

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>