Mark Hill wrote:
> I have a friend that built at 4 x 4CX250B PA for HF. When it came to
> connect to the valve tops, he drilled a hole in each the anodes and
> used four screws. Works fine!
I can't see any realistic clamp hurting the anode on a GS35. A self tapper
in between the vanes would probably work fine. I have to admit to using a
200W soldering iron to connect to '250 anodes in the past - the GS35 would
need a blow torch.
Steve
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 03/02/05
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|