Re: [Amps] GS35B Plate connection suggestions wanted

[PA3DUV <pa3duv@planet.nl>]

Steve,

We all have our little secrets.
A long time ago I have smoked a 4CX250B RF deck and guess what... I  inhaled 
the smoke...

Cheers, Dick
PA3DUV


----- Original Message ----- 
From: "Steve Thompson" <g8gsq@ic24.net>
To: <amps@contesting.com>
Sent: Saturday, February 05, 2005 11:53 PM
Subject: Re: [Amps] GS35B Plate connection suggestions wanted


> Mark Hill wrote:
> > I have a friend that built at 4 x 4CX250B PA for HF.  When it came to
> > connect to the valve tops, he drilled a hole in each the anodes and
> > used four screws.  Works fine!
> I can't see any realistic clamp hurting the anode on a GS35. A self tapper
> in between the vanes would probably work fine. I have to admit to using a
> 200W soldering iron to connect to '250 anodes in the past - the GS35 would
> need a blow torch.
>
> Steve
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 03/02/05
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps